B&K Precision 2516 - Manual - Manual (Page 108)

108
4 Using the Digital Multimeter
The handheld digital storage oscilloscope has a built-in multimeter that can
measure DC and AC voltage, DC and AC current, resistance, diode,
continuity, and capacitance.
To set the instrument to the digital multimeter mode, press , and
the display will enter the multimeter display, as shown below.
Figure 58 - Multimeter Display
Mode and input indicators
to illustrate the current
meter function and which
inputs to connect to
externally to make
measurements.
Actual measured reading for
the selected measurement
function. Top right
indicates ranging mode
(AUTO or MANUAL).
Bar graph meter of the
measured value.