B&K Precision 2516 - Manual - Manual (Page 106)

106
In this mode, the cursor(s) will be displayed when selecting automatic
measurements.
For example, toggle to go to Measure menu.
Select any of the five measurements displayed in the menu display area,
then select any measurement parameter types.
Selecting Vpp as the voltage measurement Type will show the following
display, with two cursors shown on display to illustrate their positions to
which the measurements are being made.
Figure 56 - Auto Cursor Measuring Vpp
Selecting Period as the time measurement Type will show the following
display, with two cursors shown on display to illustrate their positions to
which the measurements are being made.