B&K Precision 2516 - Manual - Manual (Page 117)

117
WARNING:
Do not connect more than 600 mA AC current
across the mA input terminal or the protection
fuse will be tripped. Never input 10 A or more
current across the terminal or the instrument will
be damaged and warranty will be void.
Higher Current Measurements (Up to 10 A)
Follow these steps to make measurements up to 10 A.
1.
Connect the black test lead to the COM input.
2.
Connect the red test lead to the 10A input.
3.
Probe with the test leads to the DUT and take the measured reading
on display.
Figure 65 - Connection for Higher AC Current Measurement
WARNING:
Do not connect more than 10 A DC current across
the 10A input terminal or the protection fuse will
be tripped.
10 A mA COM V.Ω.C
DC Current
+ -
A