B&K Precision 2516 - Manual - Manual (Page 97)

97
Dut
, ,
, ,
, ,
Display the corresponding icon
for the selected time
measurement as well as the
measured value.
Return Return to the Measure menu.
Period – Period of the
signal
Fall Time – Time between
voltage level falling from
90% to 10%
Freq – Frequency of the
signal
BWid – Duration of a
burst over entire
waveform
+Wid – Time between first
rising edge and next falling
edge at 50% voltage level
+Dut – Ratio between
first positive pulse width
and period
-Wid – Time between first
falling edge and next rising
edge at 50% voltage level
-Dut – Ratio between first
negative pulse width and
period
Rise Time – Time between
voltage level rising from
10% to 90%
Delay Measurement Parameters
Table 39 - Delay Measurement Parameters Menu
Menu
option
Setting Description
Source CH1, CH2
Select input signal source for
delay measure.
Type Phase, FRR, FRF, FFR, FFF, Select the type of delay