B&K Precision 2516 - Manual - Manual (Page 111)

111
Figure 59 - Out of Range
CAUTION:
Always connect the test leads to the instrument
inputs first before probing the DUT to avoid
potential shock hazard.
Follow these steps to make a measurement.
1.
Connect the negative (-) side with the black test lead to the COM
input.
2.
Connect the positive (+) side with the red test lead to the V.Ω.C
input.
3.
Probe with the test leads to the DUT and take the measured reading
on display.
Figure 60 - Connection for DC Voltage Measurement
10 A mA COM V.Ω.C
DC Voltage
+ -