B&K Precision 2516 - Manual - Manual (Page 3)

3
A CAUTION statement calls attention to an operating procedure, practice,
or condition, which, if not followed correctly, could result in damage to or
destruction of part or all of the product.
NOTE:
Voltage ratings are given as “working voltage”. They
should be read as Vac-rms (50 – 60 Hz) for AC sine
wave applications and as Vdc for DC applications.
WARNING
 Do not connect the scope probes and DMM leads simultaneously.
 Before using the DMM functions, disconnect all scope probes. Likewise,
disconnect all DMM test leads before using any scope functions.
 When not in use, remove all scope probes, DMM test leads, and the USB
cable.
WARNING
To avoid potential fire or shock hazard:
 Disconnect all probes, leads, power adapter, and USB cable before
opening the battery cover.
 Do not turn on the instrument while the battery cover is removed.
 Use only the included insulated probes, test leads, and power adapter
supplied with the instrument.
 Use only the battery pack supplied with the instrument or approved by
us. Do not use other substitutes.
 For AC power operation, always connect the adapter to the outlet first
before connecting to the instrument.
 Observe all markings and ratings on the instrument before connecting
to the instrument.
 While making measurements, verify that the performance ratings of
instruments and accessories that are used meet the correct safety levels
of the instrument.