B&K Precision 2516 - Manual - Manual (Page 104)

104
Track Cursor Mode
Track cursor mode allows users to setup two cursors with both time and
voltage tracked from selected signal sources.
From the Cursor menu, set Mode to Track. Select the source for Cursor A
and the source for Cursor B by toggling and respectively.
To adjust Cursor A, select it with to that it’s highlighted, then use
the and arrow keys to adjust its position. Do the same
to adjust Cursor B by selecting it with .
Table 42 - Track Cursor Menu
Menu
Option
Setting Description
Mode Track Set to track cursor mode.
Cursor A
CH1, CH2,
NONE
Select signal source for cursor A to measure.
Cursor B
CH1, CH2,
NONE
Select signal source for cursor B to measure.
Cur A Adjust cursor A position.
Cur B Adjust cursor B position.