B&K Precision 2516 - Manual - Manual (Page 61)

61
To move the vertical position up or down, use the left vertical position keys
(for CH1) or right vertical position keys (for CH2) . If the up or down key
is pressed down for > 3 seconds, the position change will be coarse. The
vertical position relative to center 0 reference will be indicated when
changed, as illustrated below:
Figure 31 - Vertical Position Indicator
Adjust Vertical Scale
The vertical scale factor can be adjusted by pressing the left volts/div range
keys (for CH1) or the right volts/div range keys (for CH2) . To increase
the scale, press V. To decrease, press mV.
By default, the volts/div range keys will change the vertical scale factor in 1-
2-5 increments. Users can select fine control so that the change will be
finer in increments of 10 mV per key press. To do this, press either or
and press in the channel menu to select Fine for Volts/Div
menu option.