GE Industrial Solutions CPS6000-M2 - Manual (Page 127)

CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008 127
Appendix B: EasyView for Windows
®
Overview
EasyView® for Windows OS (EasyView) is a program that runs on an IBM®-compatible PC
with an RS-232 port or laptop computer and provides access to a Millennium II Controller.
(Hereafter the term PC is used to refer to a PC with an RS-232 port or laptop computer.) The
program provides access to controller alarms, system status, control and configuration. To use
EasyView you will have to load the EasyView application onto your PC, connect your PC to the
controller, and run the EasyView application.
Loading the EasyView Application
The EasyView software may be freely downloaded from the Lineage Power web site from
http://www.lineagepower.com
Click on the Download link and scroll down the page to the EasyView Monitoring Software
section in order to download the EasyView. Once downloaded, install the software.
Making the Connection
To use EasyView to access a Millennium II controller you will need a PC, and a controller
programming cable (comcode 848658100). Connect the cable to the serial port of your PC and to
the controller programming connector of the Millennium II.
Windows is a registered trademark of Microsoft Corporation
IBM is a registered trademark of IBM Corporation