EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 35)

Play/Pause
IN/OUT
Point Position
Indicator
Timecode Value Color
defined OUT point point
Play/Pause IN and OUT
defined After OUT point Duration from OUT
point White
5.4.7. Jog Bar
When a clip is loaded, the jog bar shows the clip duration and its guardbands..
• The grey section represents the clip length, between the IN point and the OUT point.
• The blue sections represent the guardbands before the IN point and after the OUT
point.
When a local train is loaded, the jog bar displays:
The following indicators represent the different positions:
Line
color
Meaning
Green line It is shown when an IN point has been marked and represents the
temporary IN point position until the UPDATE CLIP button or the NEW
CLIP button is clicked.
Red line It is shown when an OUT point has been marked and represents the
temporary OUT point position until the UPDATE CLIP button or the NEW
CLIP button is clicked.
Gray
bullet Shows the current relative position in the loaded item.
5.5. Transport & Creation Functions
5.5.1. Purpose
As already mentioned, editors cannot update existing clips in IPEdit. However, they can
create a new clip based on a loaded clip on which a new mark IN and/or mark OUT has
been defined.
IPDirector - Version 6.2 - User Manual - IPEdit
5. Player 23