EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 140)

With the ShuttlePRO
To enter the trim mode with the ShuttlePRO, proceed as follows:
1. Position the nowline next to the transition on which you want to activate the trim
mode.
2. Select the Track Selection buttons of the tracks on which you want to activate the
trim mode.
3. Press the ShuttlePRO key to activate the trim mode.
The trim mode is activated on the nearest transition for the selected tracks and is in roll
mode by default.
How to Exclude or Include Tracks
When the trim mode is active for at least one of the tracks of the timeline, you can include
or exclude tracks by clicking the corresponding Track Selection button on the Timeline
pane.
How to Change the Trim Mode
By default, the trim mode is activated in roll mode. To change the trim mode on the user
interface via the keyboard, refer to the following table:
To activate the … In the user interface, … On the keyboard, …
Trim Left mode (Ripple A) Click next to the transition
on the left element:
Press P.
Result: The yellow vertical bar is displayed on the left element and
the Trim Left mode is active.
128 6. Timeline
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A