EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 197)

6.13.8. Adding Audio Swaps
How to Add a Swap or Mute to one or More
Elements of an Audio Track
To add an audio swap to one or more elements of an audio track, proceed as follows:
1. In the general timeline display, select the elements of a track on which you want to
define a swap. For a multiple selection, select the elements while pressing CTRL.
2. Right-click one of the selected elements and select Add Swap/Mute.
The Swap/Mute Configuration window opens:
3. Do one of the following to define a swap or mute:
◦ For a swap, click in the matrix at the intersection between the source channel to
play and the output channel on which the source should be played.
◦ For a mute, click in the matrix on the bullet located on the line of the output
channel to mute.
4. Repeat the step 3 on all the channels that you want to swap or mute.
5. Click Apply.
The swap and mutes are defined on the requested elements of the audio track. This is
symbolized with the global swap icon or the mute icon displayed on the element
in the general display of the timeline.
The swaps and mutes can be viewed on the Swap/Mute Zoom display:
IPDirector - Version 6.2 - User Manual - IPEdit
6. Timeline 185