EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 116)

Procedure
To replace one or more timeline element(s) of the same source clip from the nowline to the
OUT point using the Match Frame Replace function, proceed as follows:
1. In the Player and Timeline panes, select the tracks to be taken into account when you
will insert the media. See section "Track Selection Applied to the Timeline Element"
on page 96.
2. In the Player panel, load the clip or train that contains the material to be inserted into
the timeline.
3. Click in the jog bar to define the reference position in the loaded media.
4. In the loaded timeline, place the nowline on the element(s) to be replaced from the
nowline to the OUT point.
5. Do one of the following to execute the Match Frame Replace:
◦ Click + simultaneously in the Player.
◦ Press + on the keyboard.
The timeline element(s) whose tracks are selected are replaced by the media loaded in the
Player from the nowline to their OUT point. In this action, the reference position in the
Player is matched to the nowline in the timeline.
104 6. Timeline
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A