EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 252)

7.4.3. Overwrite the Edit Timeline with the On-Air
Timeline
If you do unwanted changes, and want to reset the TLE to the situation when you last
committed your changes, you can overwrite the edit timeline with the material from the on-
air timeline as follows:
1. Right-click the COMMIT button.
The following contextual menu is displayed:
2. Select Overwrite edited timeline with on-air timeline.
3. Confirm the operation by clicking Yes on the displayed warning message:
7.5. Edit While Playout Mode in a
Master/Slave Configuration
7.5.1. Connection Between Master and Slave EVS
Server
Before you start working, you should check that the Master and Slave EVS servers are
connected together.
To do this, open IPEdit on the IPD workstations connected to the Master and Slave EVS
servers, and check the connection messages on the Status bar of IPEdit.
The message on the Master IPEdit should specify the connection to the Slave is
established.
The message on the Slave IPEdit should specify the connection to the Master is
established.
240 7. Edit While Playout
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A