EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 232)

GPI
Setting
Description Possible Values
Level high,
Level low
GPI
duration Duration of GPI signal In frames and
seconds
GPI offset Whether, and with how much advance or delay, the
GPI signal will be sent to the third-party device. In frames and
seconds
GPI Types in IPEdit
The GPIs OUT can be used in the following context in IPEdit:
• Replace GPIs
• Video Transition GPIs
• Clip GPIs
6.17.2. Replace GPIs
Purpose
They can be used to trigger the external device that will add video or audio effects to the
part of the timeline that will be replaced.
More about Replace GPIS
See section "GPI Settings on Mark IN and Mark OUT" on page 206 for full information on
the GPIs OUT used with the Replace function.
6.17.3. Video Transition Effect GPIs
Purpose
They can be used, for example, to add video effects to cover a transition effects.
More about Replace GPIS
See section "Video Transition GPI" on page 161 for full information on the GPIs OUT used
with the video transition effects.
220 6. Timeline
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A