EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 115)

Procedure
To replace one or more timeline element(s) of the same source clip using the Match Frame
Replace function, proceed as follows:
1. In the Player and Timeline panes, select the tracks to be taken into account when you
will insert the media. See section "Track Selection Applied to the Timeline Element"
on page 96.
2. In the Player panel, load the clip or train that contains the material to be inserted into
the timeline.
3. Click in the jog bar to define the reference frame position in the loaded media.
4. In the loaded timeline, place the nowline on the element(s) to be replaced.
5. Do one of the following to execute the Match Frame Replace:
◦ Click the Match Frame Replace button in the Player.
◦ Press on the keyboard.
The timeline element(s) whose tracks are selected and where the nowline is positioned
are replaced by the media loaded in the Player. In this action, the reference position in the
Player is matched to the nowline in the timeline.
Replacing Timeline Elements From Nowline to
OUT Points
Description
The following schema shows how the Match Frame Replace is performed when timeline
elements are replaced from the nowline to the OUT point:
IPDirector - Version 6.2 - User Manual - IPEdit
6. Timeline 103