EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 100)

Selection Based on the Nowline Position
• To select all elements before the nowline, including the elements where the nowline is
positioned, press CTRL and click .
• To select all elements after the nowline, including the elements where the nowline is
positioned, click .
Selection Based on the Recorded Camera Angle
The Select Camera command available when you right-click in a timeline allows you to
select the timeline elements recorded on the camera you will choose from the list
displayed in the contextual menu:
This selection is used in combination with the Replace by command to replace all
selected clips by another camera angle.
The selection based on the recorded camera angle is done according to the following
rules:
• Only elements on the activated A/V tracks will be selected.
• Only elements recorded on the selected camera will be selected.
• If mark IN and mark OUT points are defined, only relevant elements between the
marks are taken into account for the selection.
• If no mark IN/OUT are defined, all relevant elements on the selected tracks are taken
into account for the selection.
88 6. Timeline
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A