EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 254)

7.6. Edit While Playout Settings
7.6.1. Accessing the EWP Settings
To access the settings related to the Edit While Playout mode, click the menu Tools >
Settings, and select the category IPEdit > Edit While Playing in the tree view.
7.6.2. Remaining Commit Threshold Warning
This settings allows defining when the COMMIT button will start blinking red/white. This
will draw the user's attention to the fact that (s)he should perform a commit because the
TLO nowline is coming near to the first uncommitted changes.
The value defined in this setting corresponds to the duration between the TLO nowline and
the first uncommitted change.
7.7. Managing GPI in TLO
Introduction
On some occasions, users may want to apply a GPI when the TLO nowline is on a
specific timecode. As the TLO nowline and the TLE nowline are separated in time, users
must be able to define GPIs linked to the TLO or to the TLE. For example, the use of an
external device on the on-air channel needs to be triggered by a TLO GPI.
Warning
This should be performed by an appropriate technical staff as it involves a
DEBUG screen on the EVS Video Server.
How to Set the GPI Mode
To do so, proceed as follows:
1. On the EVS video server, go to debug screen by pressing CTRL+ALT+D, then go to
screen 440, page 12/12.
2. For the GPI you want to assign to the TLE, type CTRL+ the corresponding Function
key.
In the following example, type CTRL + F1
242 7. Edit While Playout
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A