EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 202)

6.14.3. Overview of the Possible Actions
In the Volume Automation mode, you can perform the following actions:
• Increase or decrease the global audio volume of a track
• Increase or decrease the volume of a part of a track
• Modify the audio level on a given position of a track
• Reset the audio volume of a whole audio track
• Reset the audio volume of the audio track of a given element
6.14.4. Audio Volume Automation Panel
Overview
The Audio Volume Automation panel contains the main areas highlighted on the following
screenshot and shortly described in the table below.
Area Description / See section...
1. Audio Track Name The Audio Track Name shows the name of the audio track
that is displayed in Volume Automation mode.
2. Global
Increase/Decrease
button These buttons makes it possible to increase or decrease the
volume of the whole volume automation line or curve. See
section "Increasing or Decreasing the Global Volume of a
Track" on page 193 for more information.
3. Maximum Graphic
Volume Range "Maximum / Minimum Graphic Volume Range" on page 191.
4. Minimum Graphic
Volume Range "Maximum / Minimum Graphic Volume Range" on page 191.
5. 0 db line The 0 db line represents the original audio level of the track
190 6. Timeline
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A