EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 114)

In this case, the IN point or mark IN point defined in the media to add is matched to the
mark OUT point in the timeline.
6.5.5. Adding Media Using the Match Frame
Replace
Overview
The Match Frame Replace button allows you to replace timeline elements or parts
of them by matching the current position of the clip or train loaded on the Player to the
nowline position in the timeline. The system calculates automatically the mark IN and
mark OUT in the Player that will match the (part of the) timeline element(s) to be replaced.
The Match Frame Replace feature comes in three variants:
• Replacing one or more timeline element(s) of the same source clip from their IN point
to their OUT point.
• Replacing the portion of the timeline element(s) of the same source clip from the
nowline position to the OUT point of the element(s).
• Replacing a portion of timeline element(s) between a mark IN and mark OUT points
defined in the timeline.
General Rules
Track Selection
The rules for the track selection (described in the "Track Selection Applied to the Timeline
Element" on page 96) apply to the Match Frame Replace function when you use the
Player buttons or keyboard shortcuts.
Available Material
The general principles about available material remain valid for the Match Frame Replace
function. See section "Applicable Principles" on page 89.
Replacing Timeline Elements From IN to OUT
Points
Description
The following schema shows how the Match Frame Replace is performed when timeline
elements are replaced from their IN to OUT points:
102 6. Timeline
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A