EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 246)

Master/Slave Synchronization Buttons
Operation
User Interface
Button
Description
Sync TLE The Sync TLE button is only relevant with the
Master/Slave redundancy.
In this configuration, the Sync TLE button allows
synchronizing the TLE on the Master and the Slave
instances of IPEdit. This means that:
• The TLE is copied from the "Master IPEdit" to the
"Slave IPEdit".
• The timeline elements are created as clips on the
Slave EVS server.
The user can execute this command from either the
Master or the Slave IPEdit.
A global message is displayed in the global status bar
to inform the user if the timeline has been successfully
synchronized, or if the synchronization has failed.
It is recommended to synchronize the TLEs regularly
after committing changes to the Master TLO.
TLO
PlaySync The TLO PlaySync button is only relevant with the
Master/Slave redundancy.
In this configuration, clicking the TLO PlaySync
button on the Slave IPEdit will synchronizing the TLO
playout on the Slave IPEdit to the TLO playout in
progress on the Master IPEdit.
When the synchronized playout of both TLOs is
active, the button is displayed on a colored
background on the Slave IPEdit.
Note
The TLO on the Master IPEdit needs to be in PLAY for the TLO PlaySync
command to work on the Slave IPEdit.
Speed Nudging Buttons
The speed nudging consists of transport commands that allow adjusting manually and
momentarily the playout speed of a timeline in order to resynchronize the playing TLO to
an external program feed played through a vision mixer.
234 7. Edit While Playout
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A