EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual - Manual (Page 117)

Replacing Timeline Parts From Mark IN to Mark
OUT
Description
The following schema shows how the Match Frame Replace is performed when a part of
timeline between a mark IN and a mark OUT points is replaced.
You can perform a similar action to replace a portion of the timeline between a mark IN
and the nowline, or the nowline and a mark OUT. In this case, you define only the nowline
and the mark IN or OUT.
Procedure
To replace parts of a timeline between a mark IN and mark OUT points using the Match
Frame Replace function, proceed as follows:
1. In the Player and Timeline panes, select the tracks to be taken into account when you
will insert the media. See section "Track Selection Applied to the Timeline Element"
on page 96.
2. In the Player panel, load the clip or train that contains the material to be inserted into
the timeline.
3. Click in the jog bar to define the reference position in the loaded media.
4. In the loaded timeline, place the mark IN and Mark Out to define the timeline portion to
be replaced.
IPDirector - Version 6.2 - User Manual - IPEdit
6. Timeline 105