ZyXEL Communications GS-3012F Series - Manual (Page 57)

Chapter 4 Introducing the Web Configurator
GS-3012/GS-3012F User’s Guide
57
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default Administrator
password in the Logins screen. Click Advanced Application, Access Control and then
Logins to display the next screen.
Figure 22 Web Configurator: Change Password at Login
4.4 Switch Lockout
You could block yourself (and all others) from using in-band-management (managing through
the data ports) by doing one of the following:
1 Deleting the management VLAN (default is VLAN 1).
2 Deleting all port-based VLANs with the CPU port as a member. The “CPU port” is the
management port of the switch.
3 Filtering all traffic to the CPU port.
4 Disabling all ports.
MAC Table This link takes you to a screen where you can view the MAC addresses (and
types) of devices attached to what ports and VLAN IDs.
ARP Table This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
Configure Clone This link takes you to a screen where you can copy attributes of one port to
other ports.
Table 5 Navigation Panel Sub-link Descriptions (continued)
LABEL DESCRIPTION