ZyXEL Communications GS-3012F Series - Manual (Page 190)

Chapter 27 Syslog
GS-3012/GS-3012F User’s Guide
190
Figure 108 Syslog Setup
The following table describes the labels in this screen.
27.3 Syslog Server Setup
Click Management and then Syslog in the navigation panel to display the Syslog Setup
screen. Click the Syslog Server Setup link to open the following screen. Use this screen to
configure a list of external syslog servers.
Table 71 Syslog Setup
LABEL DESCRIPTION
Syslog Select this check box to turn on syslog (system logging) and then configure the
syslog settings.
Logging type This column displays the names of the categories of logs that the device can
generate.
Active Select this option to set the device to generate logs for the corresponding category.
Facility The log facility allows you to send logs to different files in the syslog server. Refer to
the documentation of your syslog program for more details.
Apply Click Apply to save your changes to the switch’s run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to begin configuring this screen afresh.