ZyXEL Communications GS-3012F Series - Manual (Page 232)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
232
32.10.4 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 84 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan <1-4094> Creates a new VLAN group. 13
exit Leaves the VLAN configuration
mode.
13
fixed list> Specifies the port(s) to be a
permanent member of this VLAN
group.
13
forbidden
Specifies the port(s) you want to
prohibit from joining this VLAN
group.
13
help Displays a list of available VLAN
commands.
13
inactive Disables the specified VLAN. 13
ip address Sets the IP address and subnet
mask of the switch in the specified
VLAN for packet loopback test.
13
manageable Allows the switch to be managed
using this specified IP address.
13
default-gateway
Sets a default gateway IP address
for this VLAN.
13
inband-default
Sets a static in-band IP address and
subnet mask.
13
inband-default
dhcp-bootp Sets the dynamic in-band IP
address.
13
inband-default
dhcp-bootp
release Releases the dynamic in-band IP
address.
13
inband-default
dhcp-bootp
renew Updates the dynamic in-band IP
address.
13
name str> Specifies a name for identification
purposes.
13
no fixed
list>
Sets fixed port(s) to normal port(s). 13
forbidden
Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address address> Deletes the IP address and subnet
mask from this VLAN.
13
ip address
default-gateway Deletes the default gateway from this
VLAN.
13