ZyXEL Communications GS-3012F Series - Manual (Page 247)

Chapter 33 Command Examples
GS-3012/GS-3012F User’s Guide
247
33.7 Example no Commands
These are the commonly used command examples that belong to the “no” group of
commands.
33.7.1 no mirror-port
Syntax:
no mirror-port
Disables port mirroring on the switch. An example is shown next.
Figure 141 no mirror-port Command Example
33.7.2 no trunk
Syntax:
no trunk
no trunk lacp
no trunk
interface
An example is shown next.
• Disable trunk one (T1).
• Disable LAPC on trunk three (T3).
• Remove ports one, three, four and five from trunk five (T5).
Figure 142 no trunk Command Example
sysname(config)# no mirror-port
where
Disables the trunk group.
lacp Disables LACP in the trunk group.
interface Removes ports from the trunk group.
sysname(config)# no trunk T1
sysname(config)# no trunk T3 lacp
sysname(config)# no trunk T5 interface 1,3-5