ZyXEL Communications GS-3012F Series - Manual (Page 241)

Chapter 33 Command Examples
GS-3012/GS-3012F User’s Guide
241
33.2.4 show logging
"
This command is not available in User mode.
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
Figure 130 show logging Command Example
"
If you clear a log (by entering
y
at the “
Clear Error Log (y/n):
” prompt), you
cannot view it again.
33.2.5 show interface
Syntax:
show interface [port-number]
This command displays statistics of a port. The following example shows that port 2 is up and
the related information.
sysname# show logging
57 Thu Jan 1 00:00:05 1970 PINI INFO main: init completed
58 Thu Jan 1 00:00:02 1970 PP0c -WARN SNMP TRAP 3: link up
59 Thu Jan 1 00:00:05 1970 PINI -WARN SNMP TRAP 0: cold start
60 Thu Jan 1 00:00:05 1970 PINI -WARN SNMP TRAP 3: link up
61 Thu Jan 1 00:00:05 1970 PINI INFO main: init completed
62 Thu Jan 1 00:00:10 1970 PP24 INFO adjtime task pause 1 day
63 Thu Jan 1 00:14:36 1970 PP0c -WARN SNMP TRAP 2: link down
Clear Error Log (y/n):