ZyXEL Communications GS-3012F Series - Manual (Page 170)

Chapter 24 Maintenance
GS-3012/GS-3012F User’s Guide
170
Figure 90 Firmware Upgrade
Type the path and file name of the firmware file you wish to upload to the switch in the File
Path text box or click Browse to locate it. After you have specified the file, click Upgrade.
"
The system does not restart automatically after you upload the firmware. You
need to use the web configurator or the boot config command to restart the
system to complete firmware upgrade.
24.6 Restore a Configuration File
Restore a previously saved configuration from your computer to the switch using the Restore
Configuration screen.
Figure 91 Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File Path text
box or click Browse to display a Choose File screen from which you can locate it. After you
have specified the file, click Restore. "config" is the name of the configuration file on the
switch, so your backup configuration file is automatically renamed when you restore using this
screen.
24.7 Backing Up a Configuration File
Backing up your switch configurations allows you to create various “snap shots” of your
device from which you may restore at a later date.
Back up your current switch configuration to a computer using the Configuration Backup
screen.