ZyXEL Communications GS-3012F Series - Manual (Page 215)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
215
32.10.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 82 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
baudrate <1|2|3|4|5> Changes the console port speed.
Choices are 1 (38400), 2 (19200),
3(9600), 4 (57600) and 5
(115200).
13
boot config Restarts the system with the
specified configuration file (1 or 2).
13
cable-
diagnosti
cs Displays whether a cable is
connected to the port (good) or
not (open).
13
configure Accesses Configuration mode. 13
copy running-config
interface port-
channel
Clones (copies) the attributes from
the specified port to other ports.
13
[active]
[name]
[speed-duplex]
[bpdu-control]
[flow-control]
[intrusion-lock]
[vlan1q]
[vlan1q-member]
[bandwidth-limit]
[port-security]
[broadcast-storm-
control]
[mirroring]
[port-access-
authenticator]
[queuing-method]
[igmp-filtering]
[spanning-tree]
[mrstp]
[port-based-vlan]
Copies the specified attributes
from one port to other ports.
13
running-config
tftp file> Backs up running configuration to
the specified TFTP server with the
specified file name.
13
tftp config
file>
Restores configuration with the
specified filename from the
specified TFTP server.
13
flash
Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable Accesses Enable (or privileged)
mode.
13
erase running-config Resets to the factory default
settings.
13