ZyXEL Communications GS-3012F Series - Manual (Page 221)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
221
classifier
<[packet-format
<802.3untag|802.3t
ag|
EtherIIuntag|Ether
IItag>] [priority
<0-7>]
[vlan ]
[ethernet-type
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac mac-addr>]
[source-port
]
[destination-mac
]
[dscp <0-63> ]
[ip-protocol
num|tcp|udp|icmp|e
gp|ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip ip-addr> [mask-
bits ]]
[source-socket
]
[destination-ip
[mask-bits bits>]]
[destination-
socket num>]
[inactive]>
Configures a classifier. A
classifier groups traffic into
data flows according to
specific criteria such as the
source address, destination
address, source port number,
destination port number or
incoming port number.
13
cluster Sets the cluster management
VLAN ID.
13
member address> password
Sets the cluster member
switch’s hardware MAC
address and password.
13
name name> Configures a name to identify
the cluster manager
13
rcommand address> Logs into a cluster member
switch.
13
default-
management band> Specifies through which
traffic flow the switch is to
send packets.
13
dhcp-relay Enables DHCP relay. 13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE