ZyXEL Communications GS-3012F Series - Manual (Page 214)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
214
32.10 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in alphabetical order. See the
related section in the User’s Guide for more background information.
32.10.1 User Mode
The following table describes the commands available for User mode.
Table 81 Command Summary: User Mode
COMMAND DESCRIPTION PRIVILEGE
enable Accesses Enable (or privileged)
mode.
0
exit Logs out from the CLI. 0
help Displays help information. 0
history Displays a list of previously
command(s) that you have
executed. The switch stores up to
256 commands in history.
0
logout Exits the CLI. 0
ping
[band|vlan ]
[size <0-1472>]
[-t] Sends a Ping request to an
Ethernet device.
0
show alarm-status Displays alarm status and
configuration.
0
hardware-monitor Displays current hardware
monitor information with the
specified temperature unit
(Celsius C or Fahrenheit F ).
0
ip Displays IP related information. 0
system-information Displays general system
information.
0
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with
the specified SSH version.
0
traceroute
[in-band|out-of-
band|vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet
takes to a device.
0