ZyXEL Communications GS-3012F Series - Manual (Page 134)

Chapter 18 Classifier
GS-3012/GS-3012F User’s Guide
134
Figure 65 Classifier
The following table describes the labels in this screen.
Table 43 Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Packet Format Specify the format of the packet. Choices are All, 802.3 tagged, 802.3 untagged,
Ethernet II tagged and Ethernet II untagged.
A value of 802.3 indicates that the packets are formatted according to the IEEE
802.3 standards.
A value of Ethernet II indicates that the packets are formatted according to RFC
894, Ethernet II encapsulation.
Layer 2
Specify the fields below to configure a layer 2 classifier.
VLAN Select Any to classify traffic from any VLAN or select the second option and
specify the source VLAN ID in the field provided.
Priority Select Any to classify traffic from any priority level or select the second option and
specify a priority level in the field provided.