ZyXEL Communications GS-3012F Series - Manual (Page 217)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
217
reload config Restarts the system with the
specified configuration file.
13
show alarm-status Displays alarm status and
configuration.
13
classifier Displays all classifier related
information.
13
Displays the specified classifier
related information.
13
cluster Displays cluster management
status.
13
candidates Displays cluster candidate
information.
13
member Displays the status of the cluster
member(s).
13
member config Displays the configuration of the
cluster member(s).
13
member mac addr> Displays the MAC address of the
cluster member(s).
13
garp Displays GARP information. 13
hardware-monitor
Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F).
13
https Displays the HTTPS information. 13
certificate Displays the HTTPS certificates. 13
key Displays the HTTPS key. 13
session Displays current HTTPS
session(s).
13
timeout Displays the HTTPS session
timeout.
13
igmp-filtering
profile Displays IGMP filter profile
settings.
13
igmp-snooping Displays IGMP snooping settings. 13
interfaces list> Displays current interface status. 13
interfaces config
Displays current interface
configuration.
13
bandwidth-control Displays bandwidth control
settings.
13
bstorm-control Displays broadcast storm control
settings.
13
egress Displays outgoing port
information.
13
igmp-filtering Displays IGMP filter profile
settings.
13
Table 82 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE