ZyXEL Communications GS-3012F Series - Manual (Page 223)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
223
unknown-multicast-
frame
Sets how to treat traffic from
unknown multicast group.
13
interface port-channel
Enables a port or a list of
ports for configuration. See
Section 32.10.5 on page 233
for more details.
13
ip address Sets the IP address and
subnet mask of the out-of-
band management port.
13
address default-
gateway Sets the default gateway’s IP
address for the out-of-band
management port.
13
name-server Sets the IP address of a
domain name server.
13
route Creates a static route. 13
[metric
] [name
]
[inactive] Sets the metric of a static
route or deactivates a static
route.
13
lacp Enables Link Aggregation
Control Protocol (LACP).
13
system-priority <1-65535> Sets the priority of an active
port using LACP.
13
loginPreceden
ce LocalRADIUS |
RADIUSOnly> Select which database the
switch should use (first) to
authenticate a user.
14
logins username
password
Configures up to four read-
only login accounts.
14
username
privilege <0-14> Sets the access privilege for
the existing login accounts.
The higher the value, the
more commands are allowed.
14
logout Exits the CLI. 13
mac-aging-
time <10-3000> Sets learned MAC aging
time.
13
mac-filter name mac
vlan
drop
Configures a static MAC
address port filtering rule.
13
name mac
vlan
drop
inactive Disables a static MAC
address port filtering rule.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE