ZyXEL Communications GS-3012F Series - Manual (Page 231)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
231
server inactive Disables a syslog server
entry.
13
level <0-7> Sets which severity level(s)
of logs are sent to this syslog
server. A lower number is
more critical.
13
type interface, switch,
authentication,
ip> Sets the device to generate a
category of logs.
13
type interface, switch,
authentication,
ip> facility <0-7> Sets the facility (file) on the
syslog server to which the
switch sends a category of
logs.
13
time Sets the time in hour, minute
and second format.
13
date year> Sets the date in year, month
and day format.
13
timezone <-
1200|...|1200> Selects the time difference
between UTC (formerly
known as GMT) and your
time zone.
13
timesync Sets the time server protocol. 13
server Sets the IP address of your
time server.
13
trunk
>
Activates a trunk group. 13
>interface list> Adds a port(s) to the
specified trunk group.
13
>lacp Enables LACP for a trunk
group.
13
interface list> timeout
Defines the port number and
LACP timeout period.
13
vlan <1-4094> Enters the VLAN
configuration mode. See
Section 32.10.4 on page 232
for more information.
13
vlan-type <802.1q|port-
based>
Specifies the VLAN type. 13
vlan1q gvrp Allows VLAN groups beyond
the local switch.
13
port-isolation Enables port isolation. 13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE