ZyXEL Communications GS-3012F Series - Manual (Page 151)

Chapter 21 Multicast
GS-3012/GS-3012F User’s Guide
151
Figure 73 Multicast Setting
The following table describes the labels in this screen.
Table 52 Multicast Setting
LABEL DESCRIPTION
IGMP Snooping
Active Select Active to enable IGMP snooping to forward group multicast traffic only to
ports that are members of that group.
Host Timeout Specify the time (from 1 to 16,711,450) in seconds that elapses before the switch
removes an IGMP group membership entry if it does not receive report messages
from the host.
Leave Timeout Enter an IGMP leave timeout value (from 1 to 16,711,450) in seconds. This
defines how many seconds the switch waits before removing an IGMP snooping
membership entry when an IGMP leave message is received from a host.
802.1p Priority Select a priority level (0-7) to which the switch changes the priority in outgoing
IGMP control packets. Otherwise, select No-Change to not replace the priority.
IGMP Filtering Select Active to enable IGMP filtering to control which IGMP groups a subscriber
on a port can join.