ZyXEL Communications GS-3012F Series - Manual (Page 227)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
227
ssh Disables SSH (Secure Shell)
server access to the switch.
13
telnet Disables telnet access to the
switch.
13
snmp-server trap-destination
Removes a configured trap
destination IP address.
13
spanning-tree Disables STP. 13
Disables STP on listed ports. 13
ssh key
Disables the secure shell
server encryption key. Your
switch supports SSH
versions 1 and 2 using RSA
and DSA authentication.
13
known-hosts Removes all remote hosts. 13
known-hosts
Removes the specified
remote hosts from the list of
all known hosts.
13
known-hosts
[1024|ssh-
rsa|ssh-dsa] Removes remote known
hosts with the specified
public key (1024-bit RSA1,
RSA or DSA).
13
storm-control Disables broadcast storm
control.
13
syslog Disables syslog. 13
server Disables a syslog server
entry.
13
server
inactive Enables a syslog server
entry.
13
type interface,
switch,
authentication,
ip> Sets the device to not
generate a category of logs.
13
timesync Disables the time setting on
the timeserver.
13
trunk T6> Disables the specified trunk
group.
13
T6> interface
Removes ports from the
specified trunk group.
13
T6> lacp Disables LACP in the
specified trunk group.
13
vlan Deletes the static VLAN
entry.
13
vlan1q gvrp Disables GVRP on the
switch.
13
port-isolation Disables port isolation. 13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE