ZyXEL Communications GS-3012F Series - Manual (Page 216)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
216
interface port-
channel list> Resets to the factory default
settings on a per port basis.
13
interface port-
channel list> [[active]
[name]
[speed-duplex]
[bpdu-control]
[flow-control]
[intrusion-lock]
[vlan1q]
[vlan1q-member]
[bandwidth-limit]
[port-security]
[broadcast-storm-
control]
[mirroring]
[port-access-
authenticator]
[queuing-method]
[igmp-filtering]
[spanning-tree]
[mrstp]
[port-based-
vlan]]
Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
exit Exits the CLI. 13
help Displays help information. 13
history Displays a list of command(s) that
you have previously executed.
13
igmp-
flush Removes all IGMP information. 13
kick tcp Drops a TCP session. 13
logout Exits the CLI. 13
mac-flush Clears the MAC address table. 13
Removes all learned MAC
address on the specified port(s).
13
no arp Flushes the ARP (Address
Resolution Protocol) table.
13
interface number> Clears the interface status of the
specified port(s).
13
logging Clears the system log. 13
ping
[band|vlan id>]
[size <0-1472>]
[-t]
Sends a Ping request to an
Ethernet device.
13
Table 82 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE