ZyXEL Communications GS-3012F Series User Manual
Page 222
Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
222
helper-address
[svr3_ip]
Sets the IP addresses of up
to 3 DHCP servers.
13
information
Allows the switch to add
system name to agent
information.
13
option
Allows the switch to add
DHCP relay agent
information.
13
exit
Returns you to User mode.
13
garp join
<100-65535>
leave
leaveall
Configures GARP time
settings.
13
help
Displays help information.
13
history
Displays a list of previously
command(s) that you have
executed.
13
hostname
Sets the switch’s name for
identification purposes.
Note: Spaces are
allowed in the CLI only
when the system name
is in “quotation marks”.
Example:
hostname “GS-
3012”
13
https
cert-regeneration
Re-generates a certificate.
13
igmp-
filtering
Enables IGMP filtering on the
switch.
13
profile
start-address
end-address
Sets the range of multicast
address(es) in a profile.
13
igmp-snooping
Enables IGMP snooping.
13
8021p-priority <0
- 7>
Select a priority level (0-7)
with which the switch
replaces the priority in
outgoing IGMP control
packets (belonging to this
multicast VLAN).
13
host-timeout <1 -
16711450>
Sets the IGMP host timeout
value.
13
leave-timeout <1 -
16711450>
Sets the IGMP leave timeout
value.
13
reserved-
multicast-group
Sets how to treat a frame
with a reserved multicast
address.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE