ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 80)

Chapter 3 Wizard Setup
ZyWALL 2WG User’s Guide
80
3.2.2 Internet Access Wizard: Second Screen
Click Next to go to the screen where you can register your ZyWALL and activate the free
content filtering trial application. Otherwise, click Skip to display the congratulations screen
and click Close to complete the Internet access setup.
Figure 20 Internet Access Wizard: Second Screen
My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Address Type the IP address of the PPTP server.
Connection ID/
Name
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
WAN IP Address
Assignment
IP Address
Assignment
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
My WAN IP
Address
Enter your WAN IP address in this field.
First DNS Server
Second DNS
Server
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a machine in order
to access it.
Back Click Back to return to the previous wizard screen.
Apply Click Apply to save your changes and go to the next screen.
Table 14 ISP Parameters: PPTP Encapsulation
LABEL DESCRIPTION