ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 564)

Chapter 39 Filter Configuration
ZyWALL 2WG User’s Guide
564
39.3 Example Filter
Let’s look at an example to block outside users from accessing the ZyWALL via telnet. Please
see our included disk for more example filters.
Figure 354 Telnet Filter Example
1 Enter 21 from the main menu to open Menu 21 - Filter and Firewall Setup.
2 Enter 1 to open Menu 21.1 - Filter Set Configuration.
3 Enter the index of the filter set you wish to configure (say 3) and press [ENTER]
.
4 Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
5 Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.3 - Filter
Rules Summary.
6 Enter 1 to configure the first filter rule (the only filter rule of this set). Make the entries
in this menu as shown in the following figure.
Log Select the logging option from the following:
None - No packets will be logged.
Action Matched - Only packets that match the rule parameters will be logged.
Action Not Matched - Only packets that do not match the rule parameters will be logged.
Both – All packets will be logged.
Action
Matched
Select the action for a packet matching the rule.
Options are Check Next Rule, Forward and Drop.
Action Not
Matched
Select the action for a packet not matching the rule.
Options are Check Next Rule, Forward and Drop.
Once you have completed filling in Menu 21.1.1.1 - Generic Filter Rule, press [ENTER] at the
message “Press ENTER to Confirm” to save your configuration, or press [ESC] to cancel. This data will
now be displayed on Menu 21.1.1 - Filter Rules Summary.
Table 226 Generic Filter Rule Menu Fields
FIELD DESCRIPTION