2 bandwidth management statistics, Table 130 services and port numbers – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 367
Chapter 20 Bandwidth Management
ZyWALL 2WG User’s Guide
367
20.12.2 Bandwidth Management Statistics
Click ADVANCED > BW MGMT > Class Setup > Statistics to open the Bandwidth
Management Statistics screen. This screen displays the selected bandwidth class’s bandwidth
usage and allotments.
Source End Address
/ Subnet Mask
If you are configuring a range of IP addresses, enter the ending IP address
here. If you are configuring a subnet of addresses, enter the subnet mask here.
Refer to
for more information on IP subnetting.
Source Port
Enter the starting and ending destination port numbers. Enter the same port
number in both fields to specify a single port number. See
for a table of services and port numbers.
Protocol ID
Enter the protocol ID (service type) number, for example: 1 for ICMP, 6 for TCP
or 17 for UDP.
Apply
Click Apply to save your changes back to the ZyWALL.
Cancel
Click Cancel to exit this screen without saving.
Table 130 Services and Port Numbers
SERVICES
PORT NUMBER
ECHO
7
FTP (File Transfer Protocol)
21
SMTP (Simple Mail Transfer Protocol)
25
DNS (Domain Name System)
53
Finger
79
HTTP (Hyper Text Transfer protocol or WWW, Web)
80
POP3 (Post Office Protocol)
110
NNTP (Network News Transport Protocol)
119
SNMP (Simple Network Management Protocol)
161
SNMP trap
162
PPTP (Point-to-Point Tunneling Protocol)
1723
Table 129 ADVANCED > BW MGMT > Class Setup > Add Sub-Class (continued)
LABEL
DESCRIPTION