ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 188)

Chapter 10 Wireless LAN
ZyWALL 2WG User’s Guide
188
Figure 90 Configuring SSID
The following table describes the labels in this screen.
10.8 Configuring Wireless Security
Click NETWORK > WIRELESS CARD > Security to open the Security screen. Use this
screen to create security profiles. A security profile is a group of configuration settings which
can be assigned to an SSID profile in the Wireless Card screen.
The screen changes when you configure a security profile and varies according to the security
modes you select.
Table 57 Configuring SSID
LABEL DESCRIPTION
Name Enter a name (up to 32 printable 7-bit ASCII characters) identifying this
profile.
SSID When a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
Hide SSID Select Disable if you want the ZyWALL to broadcast this SSID (a wireless
client scanning for an AP will find this SSID). Alternatively, select Enable to
have the ZyWALL hide this SSID (a wireless client scanning for an AP will not
find this SSID).
Security Select a security profile to use with this SSID profile. See Section 10.8 on
page 188 for more information.
RADIUS This displays N/A if the security profile you selected does not use RADIUS
authentication. See Section 10.8 on page 188 for more information.
This displays Radius Configuration if you select a security profile that uses
RADIUS authentication. Click Radius Configuration to go to the RADIUS
screen where you can view and/or change the RADIUS settings.
See
Section 16.3 on page 325 for more information.
Enable MAC Filtering Select Enable from the drop down list box to activate MAC address filtering.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.