ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 493)

Chapter 29 WAN and Dial Backup Setup
ZyWALL 2WG User’s Guide
493
Figure 289 3G Modem Setup in WAN Setup
The following table describes the fields in this screen.
29.4.2 Remote Node Profile (3G WAN)
Enter 2 in Menu 11 - Remote Node Setup to open Menu 11.2 - Remote Node Profile (3G
WAN) (shown below) and configure the setup for your 3G connection.
Menu 2 - WAN Setup
WAN 1 MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
3G Modem Setup:
APN= internet
PIN code= 0000
Press ENTER to Confirm or ESC to Cancel:
Table 201 3G Modem Setup in WAN Setup
FIELD DESCRIPTION
3G Modem
Setup
APN Enter the APN (Access Point Name) provided by your service provider. Connections
with different APNs may provide different services (such as Internet access or MMS
(Multi-Media Messaging Service)) and charge method.
You can enter up to 31 ASCII printable characters. Spaces are allowed.
PIN Code A PIN (Personal Identification Number) code is a key to a 3G card. Without the PIN
code, you cannot use the 3G card.
Enter the 4-digit PIN code (0000 for example) provided by your ISP. If you enter the
PIN code incorrectly, the 3G card may be blocked by your ISP and you cannot use
the account to access the Internet.
If your ISP disabled PIN code authentication, enter an arbitrary number.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.