ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 531
Chapter 36 IP Static Route Setup
ZyWALL 2WG User’s Guide
531
IP Subnet Mask
Enter the IP subnet mask for this destination.
Gateway IP
Address
Enter the IP address of the gateway. The gateway is an immediate neighbor of your
ZyWALL that will forward the packet to the destination. On the LAN, the gateway
must be a router on the same segment as your ZyWALL; over the WAN, the
gateway must be the IP address of one of the remote nodes.
Metric
Enter a number from 1 to 15 to set this route’s priority among the ZyWALL’s routes
). The smaller the number, the higher priority the route
has.
Private
This parameter determines if the ZyWALL will include the route to this remote node
in its RIP broadcasts. If set to Yes, this route is kept private and not included in RIP
broadcast. If No, the route to this remote node will be propagated to other hosts
through RIP broadcasts.
Once you have completed filling in this menu, press [ENTER] at the message “Press ENTER to
Confirm…” to save your configuration, or press [ESC] to cancel.
Table 216 Menu 12. 1: Edit IP Static Route
FIELD
DESCRIPTION