Figure 57 network > bridge, Table 29 network > bridge – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 128
Chapter 7 Bridge Screens
ZyWALL 2WG User’s Guide
128
Figure 57 NETWORK > Bridge
The following table describes the labels in this screen.
Table 29 NETWORK > Bridge
LABEL
DESCRIPTION
Bridge IP Address Setup
IP Address
Type the IP address of your ZyWALL in dotted decimal notation.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address.
Gateway IP Address
Enter the gateway IP address.
First/Second/Third DNS
Server
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. The DNS server is extremely
important because without it, you must know the IP address of a machine
before you can access it. The ZyWALL uses a system DNS server (in the
order you specify here) to resolve domain names for content filtering, the
time server, etc.
If you have the IP address(es) of the DNS server(s), enter the DNS server's
IP address(es) in the field(s) to the right.
Rapid Spanning Tree
Protocol Setup
Enable Rapid Spanning
Tree Protocol
Select the check box to activate RSTP on the ZyWALL.