Figure 275 main menu (bridge mode), Table 187 main menu summary – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Page 472

Chapter 27 Introducing the SMT

ZyWALL 2WG User’s Guide

472

Figure 275 Main Menu (Bridge Mode)

The following table describes the fields in this menu.

ZyWALL 2WG Main Menu

Getting Started Advanced Management
1. General Setup 21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance

99. Exit

Enter Menu Selection Number:

Table 187 Main Menu Summary

MENU TITLE

FUNCTION

General Setup

Use this menu to set up device mode, dynamic DNS and

administrative information.

WAN Setup

Use this menu to clone a MAC address from a computer on your LAN

and configure the backup WAN dial-up connection. You can also use

this menu to configure 3G modem setting on the ZyWALL.

LAN Setup

Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP

settings.

Internet Access Setup

Configure your Internet access setup (Internet address, gateway, login,

etc.) with this menu.

DMZ Setup

Use this menu to apply DMZ filters, and configure DHCP and TCP/IP

settings for the DMZ port.

Route Setup

Use this menu to configure your WAN route assessment, traffic

redirect properties and failover parameters.

Wireless Setup

Use this menu to configure WLAN DHCP and TCP/IP settings for the

wireless LAN interface.

Remote Node Setup

Use this menu to configure detailed remote node settings (your ISP is

also a remote node) as well as apply WAN filters.

Static Routing Setup

Configure IP static routes in this menu.

NAT Setup

Use this menu to configure Network Address Translation.

Filter and Firewall

Setup

Configure filters and activate/deactivate the firewall.

SNMP Configuration

Use this menu to configure SNMP-related parameters.

System Password

Change your password in this menu (recommended).

System Maintenance

From displaying system status to uploading firmware, this menu

provides comprehensive system maintenance.

IP Routing Policy Setup Configure and display policies for use in IP policy routing.