ZyXEL Communications ZyXEL ZyWALL 2WG - Manual (Page 260)

Chapter 14 IPSec VPN
ZyWALL 2WG User’s Guide
260
Figure 144 SECURITY > VPN > VPN Rules (IKE)
The following table describes the labels in this screen.
Table 81 SECURITY > VPN > VPN Rules (IKE)
LABEL DESCRIPTION
VPN Rules These VPN rules define the settings for creating VPN tunnels for secure
connection to other computers or networks.
Click this icon to add a VPN gateway policy (or IPSec rule).
Gateway Policies The first row of each VPN rule represents the gateway policy.
The gateway policy identifies the IPSec routers at either end of a VPN tunnel
(My ZyWALL and Remote Gateway) and specifies the authentication,
encryption and other settings needed to negotiate a phase 1 IKE SA (click the
edit icon to display the other settings).
My ZyWALL This represents your ZyWALL.
The WAN IP address, domain name or dynamic domain name of your
ZyWALL displays in router mode.
The ZyWALL’s IP address displays in bridge mode.
Remote
Gateway
This represents the remote secure gateway.
The IP address, domain name or dynamic domain name of the remote IPSec
router displays if you specify it, otherwise Dynamic displays.
Click this icon to add a VPN network policy.
Network Policies The subsequent rows in a VPN rule are network policies. A network policy
identifies the devices behind the IPSec routers at either end of a VPN tunnel
and specifies the authentication, encryption and other settings needed to
negotiate a phase 2 IPSec SA.
Local
Network
This is the network behind the ZyWALL. A network policy specifies which
devices (behind the IPSec routers) can use the VPN tunnel.
Remote
Network
This is the remote network behind the remote IPsec router.