3 system information and console port speed, 1 system information – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 575
Chapter 41 System Information & Diagnosis
ZyWALL 2WG User’s Guide
575
41.3 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To
get to the System Information and Console Port Speed:
1 Enter 24 to go to Menu 24 - System Maintenance.
2 Enter 2 to open Menu 24.2 - System Information and Console Port Speed.
3 From this menu you have two choices as shown in the next figure:
Figure 364 Menu 24.2: System Information and Console Port Speed
41.3.1 System Information
System Information gives you information about your system as shown below. More
specifically, it gives you information on your routing protocol, Ethernet address, IP address,
etc.
Ethernet Address
This is the MAC address of the port listed on the left.
IP Address
This is the IP address of the port listed on the left.
IP Mask
This is the IP mask of the port listed on the left.
DHCP
This is the DHCP setting of the port listed on the left.
System up Time
This is the total time the ZyWALL has been on.
CARD bridged to
This field shows whether the wireless card is set to be part of the LAN, DMZ or
WLAN.
You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24.
Table 229 System Maintenance: Status Menu Fields (continued)
FIELD
DESCRIPTION
Menu 24.2 - System Information and Console Port Speed
1. System Information
2. Console Port Speed
Please enter selection: