6 port statistics – ZyXEL Communications ZyXEL ZyWALL 2WG User Manual
Page 69
Chapter 2 Introducing the Web Configurator
ZyWALL 2WG User’s Guide
69
2.4.6 Port Statistics
Click Port Statistics in the HOME screen. Read-only information here includes port status
and packet specific statistics. The Poll Interval(s) field is configurable. Not all items
described are available on all models.
REMOTE
MGMT
WWW
Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTPS or HTTP to manage
the ZyWALL.
SSH
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Secure Shell to manage the
ZyWALL.
TELNET
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
ZyWALL.
FTP
Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the ZyWALL.
SNMP
Use this screen to configure your ZyWALL’s settings for Simple
Network Management Protocol management.
DNS
Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the ZyWALL.
CNM
Use this screen to configure and allow your ZyWALL to be
managed by the Vantage CNM server.
UPnP
UPnP
Use this screen to enable UPnP on the ZyWALL.
Ports
Use this screen to view the NAT port mapping rules that UPnP
creates on the ZyWALL.
ALG
ALG
Use this screen to allow certain applications to pass through the
ZyWALL.
LOGS
View Log
Use this screen to view the logs for the categories that you
selected.
Log Settings
Use this screen to change your ZyWALL’s log settings.
Reports
Use this screen to have the ZyWALL record and display the
network usage reports.
MAINTENANCE General
This screen contains administrative.
Password
Use this screen to change your password.
Time and Date Use this screen to change your ZyWALL’s time and date.
Device Mode
Use this screen to configure and have your ZyWALL work as a
router or a bridge.
F/W Upload
Use this screen to upload firmware to your ZyWALL
Backup &
Restore
Use this screen to backup and restore the configuration or reset
the factory defaults to your ZyWALL.
Restart
This screen allows you to reboot the ZyWALL without turning the
power off.
LOGOUT
Click this label to exit the web configurator.
Table 6 Screens Summary (continued)
LINK
TAB
FUNCTION